Search results for "Nuclear energy"
showing 10 items of 614 documents
Characterization and thermomechanical assessment of a SiC-sandwich material for Flow Channel Inserts in DCLL blankets
2019
Abstract Flow Channel Inserts (FCIs) are key elements in the high-temperature Dual Coolant Lead Lithium (DCLL) blanket, since they insulate electrically the flowing PbLi to avoid MHD effects and protect the steel structure from the hot liquid metal. SiC-based materials are main candidates for high-temperature FCIs, being a dense-porous SiC-based sandwich material an attractive option. The present work is focused on the development of such a SiC-based material. On the one hand, in order to assess the suitability of the concept for FCIs, the main results of a stress analysis, MHD and heat transfer simulations are summarized. On the other hand, the experimental production of the SiC-based mate…
Nanoseconds Timing System Based on IEEE 1588 FPGA Implementation
2019
Clock synchronization procedures are mandatory in most physical experiments where event fragments are readout by spatially dislocated sensors and must be glued together to reconstruct key parameters (e.g. energy, interaction vertex etc.) of the process under investigation. These distributed data readout topologies rely on an accurate time information available at the frontend, where raw data are acquired and tagged with a precise timestamp prior to data buffering and central data collecting. This makes the network complexity and latency, between frontend and backend electronics, negligible within upper bounds imposed by the frontend data buffer capability. The proposed research work describ…
DEPFET Macropixel Detectors for MIXS: First Electrical Qualification Measurements
2010
The Mercury Imaging X-ray Spectrometer (MIXS) is one of the instruments on board the Mercury Planetary Orbiter of the fifth European Space Agency (ESA) cornerstone mission BepiColombo. This spectrometer comprises two instruments and allows imaging X-ray spectroscopy of the Mercurian surface. The focal plane arrays for the energy and spatial resolved detection of X-rays are based on depleted P-channel FET (DEPFET) macropixel detectors. We report on the first electrical qualification measurements of DEPFET macropixel flight hardware, which are done at room temperature. The measurement of the transistor properties of all DEPFET pixels allows the selection of 100% electrically defect-free devic…
Investigation of corrosion defects in titanium by positron annihilation
2015
Abstract The positron annihilation method was used to study the formation of defects in titanium samples during their corrosion in the vapor of a 3% HCl solution. In particular, the distribution of defects depending on the distance from the corroding surface and the impact of an external magnetic field on the concentration of vacancies forming during the corrosion of titanium layers close to the surface were determined.
The role of yttrium and titanium during the development of ODS ferritic steels obtained through the STARS route: TEM and XAS study
2018
Abstract Oxide Dispersion Strengthened Ferritic Steels (ODS FS) are candidate materials for structural components in future fusion reactors. Their high strength and creep resistance at elevated temperatures and their good resistance to neutron radiation damage is obtained through extremely fine microstructures containing a high density of nanometric precipitates, generally yttrium and titanium oxides. This work shows transmission electron microscopy (TEM) and extended X-ray absorption fine structure (EXAFS) characterization of Fe-14Cr-2W-0.3Ti-0.24Y ODS FS obtained by the STARS route (Surface Treatment of gas Atomized powder followed by Reactive Synthesis), an alternative method to obtain O…
Pre-production validation of the ATLAS level-1 calorimeter trigger system
2006
The Level-1 Calorimeter Trigger is a major part of the first stage of event selection for the ATLAS experiment at the LHC. It is a digital, pipelined system with several stages of processing, largely based on FPGAs, which perform programmable algorithms in parallel with a fixed latency to process about 300 Gbyte/s of input data. The real-time output consists of counts of different types of trigger objects and energy sums. Prototypes of all module types have been undergoing intensive testing before final production during 2005. Verification of their correct operation has been performed stand-alone and in the ATLAS test-beam at CERN. Results from these investigations will be presented, along …
Preliminary magnetic resonance relaxometric analysis of Fricke gel dosimeters produced with polyvinyl alcohol and glutaraldehyde
2017
This work describes the preliminary analysis of Fricke gels dosimeters characterized by a new formulation making use of a matrix of polyvinyl alcohol cross-linked by adding glutaraldehyde and analyzed by means of nuclear magnetic resonance relaxometry. In previous optical studies, these gels have shown promising dosimetric features in terms of photon sensitivity and low diffusion of ferric ions produced after irradiation. In this work, we used a portable nuclear magnetic resonance relaxometer to measure the relaxation times (which are important for dosimetric applications) of these gel materials. For this purpose, we performed a study for optimizing the acquisition parameters with a nuclear…
The Crystal Barrel data acquisition system
1992
The main detector components of the Crystal Barrel (CBAR) experiment at the Low Energy Antiproton Ring (LEAR) at CERN are two proportional wire chambers, a jet drift chamber and an electromagnetic calorimeter composed of 1380 CsI(Tl) crystals, with a total of 4380 analog channels. A description is given of the use of distributed VME-based microcomputers to collect data from the various subdetectors and to merge the full event information in a global event builder. At this level the data are transferred to a mu VAX for tape storage and monitoring. >
Impurity analysis of JET DiMPle pulses
2021
Divertor monitoring pulses (DiMPle) have been run in JET from the C35 campaign onwards. They provide an opportunity to study the impurity contamination of the plasma when it is limited by different surfaces within the machine, as well as the longer term behaviour of the impurities. In these discharges the plasma is first limited on the outer wall, then on the inner wall and, subsequently, in the X-point configuration the outer strike point is positioned on the horizontal tile 5 of the machine followed by tile 6 and then the vertical tile 7. The present study details the impurity behaviour in the DiMPle pulses from JET-ILW campaigns C35 to C38, which ran from 2015 to 2019. The impurities can…
Optimization of trigeneration systems by Mathematical Programming: Influence of plant scheme and boundary conditions
2015
Abstract The large potential for energy saving by cogeneration and trigeneration in the building sector is scarcely exploited due to a number of obstacles in making the investments attractive. The analyst often encounters difficulties in identifying optimal design and operation strategies, since a number of factors, either endogenous (i.e. related with the energy load profiles) and exogenous (i.e. related with external conditions like energy prices and support mechanisms), influence the economic viability. In this paper a decision tool is adopted, which represents an upgrade of a software analyzed in previous papers; the tool simultaneously optimizes the plant lay-out, the sizes of the main…